The Stockton is a 2 bedroom, 1 bath home with vaulted ceilings throughout.  It has solid stacked walls using 70mm (2-3/4″) thick logs. Like all our models it can be customized to fit your personal needs. (sq footage is based the total footprint, living space could be less, see floor plans)

FREE STRUCTURAL ENGINEERING – PREMIUM models include site specific engineering stamped by a licensed engineering firm for roof and wind loads. Additional engineering services are available on request

Energy efficiency:  Our solid wood walls add an additional R 4.4 and have virtually no heat or cold transfer, increasing the overall thermal and comfort benefits

Tip: Mineral wool  insulation is recommended for log construction. It’s impervious to moisture with a higher R-value per inch than fiberglass, reduces noise levels & is environmentally friendly

Insulating the roof: Apply locally supplied materials to add rafters over the tongue & groove roof boards. The build up depth is determined by the required R-value in the ceiling to meet local building codes. High density spray foam provides maximum benefits, highest R-value for thickness & is water proof. These added rafters also increase the roof load capacity

Assembly: The model can be assembled in approximately 6 days or less with 3 people

Tip: House wraps & vapor barriers are required in most regions when insulating

Building Codes: Premium series homes & cabins are manufactured to meet all structural requirements for building codes including, California Title 24, earthquake, heavy snow load regions and hurricane zones

Kit includes:

• no floor, ready to assemble on a concrete slab or wood foundation
• pre-cut, numbered exterior walls
• pre-cut, numbered interior walls
• pre-cut, numbered gable components
• 3/12 roof pitch (14 degrees)
• vaulted, cathedral ceilings
• pre-cut, 100mm x 200mm (4″x8″) glulam roof purlins spaced 558mm (22″) or less
• pre-cut, numbered (18mm) 3/4″ tongue & groove roof boards
• pre-cut, numbered fascia boards
• 3 interior doors 813mm x 2040mm (32″x80″)
• 1 single wide wood windows 530mm x 530mm (21″x 21″)
• 2 double wide wood windows 1530mm x 990mm (60″x 39″)
• 3 single wide wood window 765mm x 990mm (30″x 39″)
• 1 exterior door 990mm x 2040mm (36″x80″) 1/2 glass tempered, multi locking hardware
• hardware for doors & windows
• 2 spare wall logs/spare roof boards
• 8″ log screws to connect each row, gable components, purlins
• packaged/wrapped and marked for sequence of assembly