FREE STRUCTURAL ENGINEERING – PREMIUM models include site specific engineering stamped by a licensed engineering firm for roof and wind loads. Additional engineering services are available on request

Energy efficiency:  Our solid wood walls add an additional R 4.4 and have virtually no heat or cold transfer, increasing the overall thermal and comfort benefits.

Tip: Mineral wool  insulation is recommended for log construction. It’s impervious to moisture with a higher R-value per inch than fiberglass, reduces noise levels & is environmentally friendly

Insulating the roof: Apply locally supplied materials to add rafters over the tongue & groove roof boards. The build up depth is determined by the required R-value in the ceiling to meet local building codes. High density spray foam provides maximum benefits, highest R-value for thickness & is water proof. These added rafters also increase the roof load capacity

Assembly: The model can be assembled in approximately 12 days with 3 people

Tip: House wraps & vapor barriers are required in most regions when insulating

Building Codes: Premium series homes & cabins are manufactured to meet all structural requirements for building codes including, California Title 24, earthquake, heavy snow load regions and hurricane zones

Kit includes:

• no floor, ready to assemble on a concrete slab or wood foundation
• pre-cut, numbered exterior walls
• pre-cut, numbered interior walls
• pre-cut, numbered gable components
• 4/12 roof pitch (18 degrees)
• vaulted, cathedral ceilings
• pre-cut, 100mm x 200mm (4″x8″) numbered roof purlins, beams, spaced 558mm (22″) or less
• pre-cut, numbered (18mm) 3/4″ tongue & groove roof boards
• pre-cut, numbered fascia boards
• 6  interior doors 900mm x 2040mm (36″x80″)
• 4 double wide wood windows 1530mm x 990mm (60″x 39″)
• 2 double-wide premium double-glazed wood windows 60”x 60” (1530mm x 1530mm)
• 1 single wide wood windows 530 x 530 (21″x 21″)
• 2 exterior door 990mm x 2040mm (36″x80″) 1/2 glass tempered
• deck railings with vertical balustrades
• adjustable posts
• hardware for doors & windows
• 2 spare wall logs/spare roof boards
• 8″ log screws to connect each row, gable components, purlins
• packaged/wrapped and marked for sequence of assembly