Garage 2428 G Lofted uses a precut number stackable system to build the main structure. The result is a 2 car garage with a gambrel roof and a second level loft which is accessed using a loft ladder. There is over 1300 sq’ of usable space when combining the lower and upper level.  The upper level has a dividing wall with a large opening to create 2 rooms. Once assembled studs & siding are applied to the exterior.  We offer 2 types of tongue & groove Pine siding plus an extruded PVC maintenance free siding.  The main feature of our garages is the all wood interior with vaulted/cathedral ceilings, ready to hang your tools

Kit includes:

• ready to assemble on a concrete slab
• treated starter plate 1-5/8″ x 5-1/8″ (40mm x 129mm)
• 1-5/8” x 4-3/8″ (40mm x 113mm) tongue & groove logs
• pre-cut, numbered exterior walls
• pre-cut, numbered interior walls
• pre-cut, numbered gable components
• sidewall height 95″ (2413mm) to underside of loft floor beams
• loft ladder
• 2-3/4” x 9-1/4” (70mm x 235mm) glulam floor beams, spaced 22″ (558mm) or less
• vaulted, cathedral ceilings
• 2-3/4” x 9-1/4” (70mm x 235mm) glulam roof purlins/beams, spaced 22″ (558mm) or less
• roof overhang 12” (300mm)
• center gable in loft with opening
• metal joist/purlin hangers for center gable
• pre-cut, numbered ¾″ (18mm) tongue & groove roof boards
• pre-cut, numbered fascia boards
• 4 – double wide wood windows 60″x39″ (1530mm x 990mm) 
• 1 – entry door 1/2 glass tempered 32″ x 80″ (813mm x 2033mm)
• 947 sq’ of exterior wall surface
• 104 lineal’ per row
• 1600 – 6″ log screws to connect each row, gable components, purlins
• GARAGE OVERHEAD DOORS NOT INCLUDED
• STAMPED STRUCTURAL ENGINEERING included when a siding kit is applied. The vertical studs are required to meet structural requirements for building codes. Stud and siding can be purchased locally