Tip: Mineral wool  insulation is recommended for log construction. It’s impervious to moisture with a higher R-value per inch than fiberglass, reduces noise levels & is environmentally friendly

Insulating the roof: Apply locally supplied materials to add rafters over the tongue & groove roof boards. The build up depth is determined by the required R-value in the ceiling to meet local building codes. High density spray foam provides maximum benefits, highest R-value for thickness & is water proof. These added rafters also increase the roof load capacity

Assembly: The model can be assembled in approximately 6 days or less with 3 people

Tip: House wraps & vapor barriers are required in most regions when insulating

Building Codes: Premium series homes & cabins are manufactured to meet all structural requirements for building codes including, California Title 24, earthquake, heavy snow load regions and hurricane zones

Kit includes:

• no floor, ready to assemble on a concrete slab or wood foundation
• pre-cut, numbered exterior walls
• pre-cut, numbered interior walls
• pre-cut, numbered gable components
• vaulted, cathedral ceilings
• 3/12 roof pitch (14 degrees)
• pre-cut, 100mm x 200mm (4″x8″) glulam roof purlins spaced 558mm (22″) or less
• pre-cut, numbered (18mm) 3/4″ tongue & groove roof boards
• pre-cut, numbered fascia boards
• 4 interior doors 812mm x 2040mm (32″x80″)
• 2 triple wide wood window 2120mm x 990mm (90″x39″)
• 4 double wide wood windows 1530mm x 990mm (60″x 39″)
• 1 single wide wood windows 530 x 530 (21″x 21″)
• 1 exterior door with multi locking hardware 1/2 glass tempered 990mm x 2040mm (36″x80″)
• 2 exterior double door 1550mm x 2040mm (61″ x 80″) full glass tempered
• hardware for doors & windows
• 2 spare wall logs/spare roof boards
• 8″ log screws to connect each row, gable components, purlins
• packaged/wrapped and marked for sequence of assembly